Blog

How to Invoice a Kill Fee When a Client Cancels a Project

How to invoice a kill fee when a client cancels: work done, the cancellation fee and deposit on one invoice, a worked UK example, and VAT on kill fees.

Illustration of an invoice with a KILL FEE stamp and a £1,200 total, beside the headline How to invoice a kill fee.

A client pulls the plug halfway through a project. The brief is shelved, the budget has moved, or the person who hired you has left. You have already blocked out the time, turned down other work and delivered part of the job. A kill fee (also called a cancellation fee) is how freelancers and small studios get paid fairly when that happens, and the cleanest way to collect it is a clear, itemised invoice you can make in a few minutes with a free online invoice generator.

This guide is written for freelancers and contractors in the US, the UK and other English-speaking markets. It covers what a kill fee is, when you can actually charge one, how to lay out the cancellation invoice, a worked example with a deposit already paid, and the UK VAT point that catches people out.

Quick answer: you can usually only invoice a kill fee if your contract or written agreement says so. Invoice the work completed to the cancellation date as one line, the agreed kill fee as a separate line, subtract any deposit already paid, and reference the clause and the date the client cancelled. If you are VAT-registered in the UK, assume VAT applies to the fee unless your adviser says otherwise.

What a kill fee is (and what it is not)

A kill fee is an amount the client agrees, in advance, to pay if they cancel a project before it is finished. It compensates you for reserved capacity and the work you lose by keeping the slot open. It is common in writing, journalism, design, photography, video, development and event work.

It helps to separate three different things that often get mixed together on a cancellation invoice:

  • Work already done. Hours spent, drafts delivered or milestones reached before the client cancelled. You are normally entitled to be paid for this anyway, kill fee or not.
  • The kill fee itself. An extra, pre-agreed amount, usually a percentage of the total project fee or of the unbilled remainder.
  • Expenses already committed. Stock images, licences, materials, travel or subcontractor costs you paid or are committed to paying on the client’s behalf.

Keeping these as separate lines makes the invoice easy to check, and it makes a dispute far less likely because the client can match each line to the agreement.

Kill fee vs deposit

A deposit is money paid upfront and credited against the final bill. A kill fee is only triggered by cancellation. Many contracts use both: a non-refundable deposit to start, and a kill fee clause if the project stops later. If you took a deposit, it is deducted on the cancellation invoice, just as it would be on a normal final invoice. Our post on invoicing a deposit and the final balance shows that layout in more detail.

When you can (and can’t) charge a kill fee

The short version: a kill fee is a contract term, not an automatic right. Before you send anything, check what you and the client actually agreed.

  1. There is a written kill fee clause. This is the strong case. Quote the clause, apply the percentage exactly as written, and invoice promptly.
  2. There is a contract but no kill fee clause. You can still invoice for work completed and committed expenses. Adding a kill fee the client never agreed to is likely to be refused, and it can sour a relationship you may want later.
  3. There is only an email thread or verbal agreement. Invoice for the work done. If the emails show a clear agreement on a cancellation fee, reference them, but expect more pushback.
  4. The client cancelled because of your breach. If you missed agreed deadlines or the work did not meet the brief, a kill fee clause may not apply at all. Get advice before invoicing.

Contract law differs between US states, the UK nations and other countries, and this article is general information rather than legal advice. If a large sum is at stake, a short consultation with a lawyer is cheaper than a long dispute.

Typical kill fee structures

There is no standard rate set in law. What matters is what your contract says. Common structures you will see in freelance agreements include:

  • A fixed percentage of the total project fee, regardless of progress.
  • A percentage of the unbilled remainder, on top of payment for work done.
  • A sliding scale by stage, for example a higher percentage once the final round of revisions has started.
  • A notice-period fee, such as a set number of days at your day rate for a retainer cancelled without notice.

If you are setting the clause for future contracts, work out what a lost week or month actually costs you. An hourly rate calculator helps you turn a target income into a rate, which makes it easier to justify the percentage you choose.

What to put on a cancellation invoice

A kill fee invoice is an ordinary invoice with a little extra context. Include:

  • Your business details and the client’s details, as on any invoice.
  • A unique invoice number that follows your normal sequence.
  • The invoice date and a due date that matches your contract’s payment terms.
  • A reference to the project, the purchase order if there was one, and the contract or statement of work.
  • The cancellation date and how notice was given, for example “Project cancelled by email on 3 November 2026”.
  • Line 1 — work completed up to the cancellation date, by hours, milestone or percentage.
  • Line 2 — kill fee, with the calculation spelled out (for example “Kill fee: 25% of unbilled remainder of £2,400, per clause 9.2”).
  • Line 3 — committed expenses, if any, with receipts available on request.
  • Less: deposit received, shown as a deduction (or as an amount paid) so the client sees it has been credited.
  • Tax, if you are registered and it applies.
  • Balance due and your payment details.

If you are VAT-registered in the UK, the invoice also needs the standard VAT invoice details. Our checklist of UK VAT invoice requirements lists them.

Worked example: a UK designer with a deposit

Here is a simple example using round numbers. It is an illustration, not a template for your specific contract.

A freelance designer agrees a brand identity project for £4,000. The contract says:

  • 25% deposit before work starts (£1,000), credited against the final invoice.
  • If the client cancels, they pay for work completed to date, plus a kill fee of 25% of the unbilled remainder.

The client pays the deposit. The designer finishes the research and first-round concepts, which the contract’s milestone schedule values at 40% of the project. Then the client cancels by email.

The calculation:

  • Work completed: 40% × £4,000 = £1,600
  • Unbilled remainder: £4,000 − £1,600 = £2,400
  • Kill fee: 25% × £2,400 = £600
  • Total earned: £1,600 + £600 = £2,200
  • Less deposit received: £1,000
  • Balance due (before any VAT): £1,200

If the designer is not VAT-registered, the invoice shows £1,200 due and a note such as “Not VAT registered”.

If the designer is VAT-registered at the 20% standard rate and already issued a VAT invoice for the deposit (£1,000 + £200 VAT), the cancellation invoice charges VAT on the remaining £1,200: £1,200 + £240 VAT = £1,440 due. The client has then paid VAT on the full £2,200 earned across the two invoices.

For a US freelancer the structure is the same, just in dollars and usually without VAT. Sales tax on services depends on the state and the type of service; the rules are summarised in our guide to sales tax on US invoices.

The UK VAT point: kill fees are usually taxable

For a long time, many cancellation and compensation payments were treated as outside the scope of VAT. That changed. HMRC’s Revenue and Customs Brief 2 (2022) says that, from 1 April 2022, fees charged when customers terminate a contract early are regarded as further consideration for the contracted supply, and that most early termination fees and some cancellation fees are liable for VAT if the underlying goods or services are, even if they are described as compensation or damages.

In practice, if you are VAT-registered and your design, writing or consulting services are standard-rated, plan on charging VAT on the kill fee line as well as the work-done line. The Brief links to HMRC’s detailed manual pages for edge cases; if your situation is unusual (for example the fee is genuinely for something other than your services), ask an accountant rather than guessing.

If you are not VAT-registered, you do not add VAT to any line, including the kill fee.

How to make the invoice in InvoiceDesk

You can build the cancellation invoice in the generator in a few minutes, with no account:

  1. Open the generator and fill in Your business and the client details. Use your normal next invoice number.
  2. Set the dates. If your contract says “14 days”, the invoice due date calculator gives you the exact due date to type in.
  3. Click Add item for each line: work completed, kill fee (with the percentage and clause in the description), and any committed expenses.
  4. Choose the right Tax preset for your country and registration status, or leave tax off if you are not registered.
  5. Enter the deposit the client already paid in the Amount paid field (including any VAT you charged on the deposit invoice). The generator subtracts it and shows the Balance due, so the lines above can show the full £2,200 earned. Mention the deposit invoice number in the notes.
  6. In Notes, add the cancellation date and the clause reference. Put your late-payment terms in Terms & conditions.
  7. Check the preview, then use Download PDF and email it with a short, polite cover note.

Keep the email factual: the project was cancelled on a given date, the attached invoice covers work completed and the agreed cancellation fee under the contract, the deposit has been credited, and the balance is due by the stated date. Attach any deliverables the client is entitled to once paid, or explain when they will be released.

If the client disputes or ignores it

Most clients pay a kill fee that is clearly in the contract. If yours doesn’t:

  • Re-send with the clause quoted. Often the person paying the invoice has not seen the contract.
  • Offer to split the lines. If they dispute the kill fee but not the work done, ask them to pay the undisputed amount now. If you agree to reduce the invoice, issue a credit note against it rather than editing the original; see how credit notes work.
  • Escalate in steps. A reminder, then a firm final notice, then the formal options. Our guide on what to do when a client does not pay walks through each stage.

In the UK, business-to-business invoices that go overdue can attract statutory interest and fixed compensation under late payment legislation; GOV.UK explains how this works in its late commercial payments guidance.

How to avoid the argument next time

The best kill fee invoice is one the client expected. For future projects:

  • Put the cancellation terms in the contract or statement of work, in plain words, with a worked example.
  • Define milestones and what percentage of the fee each one represents, so “work completed” is not a matter of opinion.
  • Take a deposit before you start, and say whether it is refundable.
  • Say how notice of cancellation must be given (email is fine if you say so).
  • Agree who owns drafts and unused concepts if the project stops.

FAQ

Is a kill fee the same as a cancellation fee?

In everyday freelance use, yes. Some contracts use “kill fee” for creative work and “cancellation fee” for bookings or events, but both describe a pre-agreed amount payable if the client cancels.

Can I charge a kill fee if it isn’t in my contract?

You can ask, but the client is not usually obliged to pay a fee they never agreed to. You can still invoice for work actually completed and expenses you committed to on their behalf.

Should the kill fee be a separate invoice?

It doesn’t have to be. One invoice with separate lines for work done, the kill fee and expenses is usually clearer. Use a separate invoice only if your client’s accounts team asks for one or the amounts need different purchase order numbers.

Do I charge VAT on a kill fee in the UK?

If you are VAT-registered and your services are taxable, HMRC’s 2022 guidance means most early termination and cancellation fees are treated as further payment for the supply, so VAT normally applies. If you are not registered, no VAT is added.

Is a kill fee taxable income?

It is money earned in the course of your business, so in general it is reported as business income like any other fee. Confirm the treatment with your accountant or tax authority for your country.

What if the client already paid more than I’ve earned?

If the deposit is larger than the work done plus the kill fee, check your contract for whether the deposit is refundable. If you owe money back, issue a credit note for the difference and refund it.

This article is general information about invoicing, not legal or tax advice. Check your own contract and, for large or disputed amounts, speak to a qualified adviser.

← All blog posts · Invoicing guides · Make an invoice