Blog

UK VAT Flat Rate Scheme Invoicing Guide

On the UK VAT Flat Rate Scheme? Charge 20% VAT on invoices, not your flat rate. What to show, how to work out what you pay HMRC, and a worked example.

Illustration of a UK invoice with a total of £3,000.00 and a green VAT 20% stamp, titled Invoicing on the VAT Flat Rate Scheme

If you are on the VAT Flat Rate Scheme, the most common mistake is putting your flat rate on the invoice. A web developer on 14.5% does not charge clients 14.5% VAT. You charge the normal rate, usually 20%, and the flat rate only changes how much you pay HMRC afterwards. You can make a correct VAT invoice for free with the UK invoice generator.

This guide explains how the Flat Rate Scheme works, exactly what goes on your invoices, how to work out what you owe HMRC, and the limited cost business rule that catches many freelancers out. There is a full worked example near the end.

Quick answer: on the Flat Rate Scheme you still issue normal VAT invoices. Show your VAT registration number, charge VAT at the normal rate for the supply (20% standard, 5% reduced or 0% zero rate), and show the VAT separately. Never show your flat rate percentage on the invoice. At the end of each VAT period, you multiply your VAT-inclusive turnover by your flat rate to get what you pay HMRC.

What the VAT Flat Rate Scheme is

Normally, a VAT-registered business pays HMRC the difference between the VAT it charges customers and the VAT it pays on its own purchases. GOV.UK's VAT Flat Rate Scheme guide describes how the scheme changes that:

  • you pay a fixed rate of VAT to HMRC
  • you keep the difference between what you charge your customers and what you pay to HMRC
  • you cannot reclaim the VAT on your purchases, except for certain capital assets over £2,000

The fixed rate depends on your type of business. GOV.UK publishes the full list, for example 14.5% for computer and IT consultancy, 14% for management consultancy, 11% for photography and 12% for business services not listed elsewhere.

Who can join

GOV.UK says you can join if you are VAT registered and you expect your VAT taxable turnover to be £150,000 or less, excluding VAT, in the next 12 months. You must apply to HMRC to join. You cannot join if, among other things, you left the scheme in the last 12 months or your business is closely associated with another business. You also cannot use it alongside the Cash Accounting Scheme, although the Flat Rate Scheme has its own cash-based way of working out turnover.

When you must leave

You must leave the scheme if, on the anniversary of joining, your turnover in the last 12 months was more than £230,000 including VAT, or you expect it to be in the next 12 months. You must also leave if you expect your total income in the next 30 days alone to be more than £230,000 including VAT. You can choose to leave at any time, but you then have to wait 12 months before you can rejoin.

If you are not yet VAT registered at all, this scheme does not apply to you. GOV.UK says you must register once your taxable turnover for the last 12 months goes over £90,000, or you expect it to go over £90,000 in the next 30 days. Until then, see our guide to invoicing as a UK sole trader who is not VAT registered.

What goes on a Flat Rate Scheme invoice

This is the part people get wrong, so it is worth being precise. HMRC's VAT Notice 733 says you must still issue VAT invoices to your VAT-registered customers, and that your customers will treat them as normal VAT invoices. It also says to record VAT on your sales invoices using the normal rate for the supply (standard, reduced, zero rate or exempt) and not the flat rate percentage for your trade sector.

So a Flat Rate Scheme invoice is simply a normal full VAT invoice. HMRC's internal manual page VATREC5010 lists what a full VAT invoice must show:

  1. A unique sequential invoice number
  2. The time of supply (tax point)
  3. The date of issue
  4. Your name, address and VAT registration number, matching your registration certificate
  5. Your customer's name and address
  6. A clear description of the goods or services
  7. The quantity of goods or extent of services for each item
  8. The unit price
  9. The rate of VAT and the amount payable excluding VAT for each item
  10. The total excluding VAT
  11. The rate of any cash discount offered
  12. The total VAT chargeable, in sterling

Our guide to UK VAT invoice requirements goes through each of these in more detail, including simplified invoices.

What to leave off

  • Your flat rate percentage. It is between you and HMRC. Your customer is charged, and can reclaim, VAT at the normal rate.
  • A "flat rate VAT" line. There is no such line on a sales invoice. The VAT line shows 20% (or 5% or 0%) of the net amount.
  • Any suggestion that the VAT is lower. If your customer is VAT registered, they will reclaim the full 20% you show, so the invoice must show the real VAT charged.

Special cases

  • Reverse charge supplies. If the customer must account for the VAT, for example under the construction domestic reverse charge, VATREC5010 says the invoice must include a reference to the reverse charge. Our reverse charge guide explains the wording.
  • Zero-rated and exempt supplies. Show them at 0% or as exempt in the normal way. Notice 733 explains separately how they are treated in your flat rate turnover, so check it or ask an accountant if you make many of them.
  • Customers who are not VAT registered. You still charge VAT at the normal rate on your prices. Notice 733 says you add up the VAT-inclusive total of all your supplies, whether you gave a VAT invoice or not, when you work out what you owe.

How to work out what you pay HMRC

GOV.UK says you calculate the tax you pay by multiplying your flat rate by your VAT-inclusive turnover. VAT-inclusive turnover means your business income plus the VAT you charged on it.

GOV.UK's own example: you bill a customer £1,000, add VAT at 20% to make £1,200, and you are a photographer on 11%. Your flat rate payment is 11% of £1,200, which is £132. You charged £200 VAT, paid £132, and kept £68. That difference is taxable income, so tell your accountant about it.

The 1% first-year discount

Notice 733 says that in your first year of VAT registration you can take 1% off your flat rate until the day before the first anniversary of becoming VAT registered. An IT consultant on 14.5% would use 13.5% during that first year.

The limited cost business rate of 16.5%

GOV.UK says you are a limited cost business if your goods cost less than either 2% of your turnover, or £1,000 a year if your costs are more than 2%. Limited cost businesses pay a higher rate of 16.5%, whatever their trade sector.

Many freelancers who sell their time, such as developers, writers and consultants, buy very few goods, so this rule often applies to them. Notice 733 explains which goods count, and it excludes some items such as food and drink for you or your staff and vehicle costs including fuel. For a quarterly return the £1,000 becomes £250. Notice 733 says businesses close to the 2% line may need to do the test each time they complete a VAT return, because they can move between the 16.5% rate and their sector rate. At 16.5%, the scheme gives little benefit.

Choosing a turnover method

Notice 733 describes three ways of working out flat rate turnover: basic turnover, cash-based turnover and the retailer's turnover method. Once you choose one, you must use it for at least 12 months. The basic method follows normal tax points, which is often the invoice date. The cash-based method uses the date you are paid, which can help if your clients take a long time to pay.

Worked example: an IT consultant on the scheme

Priya is a self-employed IT consultant in Manchester. She registered for VAT 18 months ago and joined the Flat Rate Scheme. Her sector rate is 14.5%, she is past her first year, and she buys enough goods for her business that she is not a limited cost business.

She sends this invoice to a VAT-registered client:

  • Invoice number INV-2026-041, dated 4 November 2026
  • Supplier: Priya's name, trading address and VAT registration number
  • Client: the client company's name and address
  • Line 1: Systems audit, 3 days at £600 per day, VAT 20%, net £1,800.00
  • Line 2: Security report, 1 at £700, VAT 20%, net £700.00
  • Total excluding VAT: £2,500.00
  • VAT at 20%: £500.00
  • Total payable: £3,000.00
  • Payment due within 30 days, with bank details

Notice what is missing: there is no 14.5% anywhere on the invoice. The client will reclaim £500 of VAT in the normal way.

At the end of her VAT quarter, Priya adds up the VAT-inclusive value of everything she invoiced. Say that is three invoices worth £9,000 net, or £10,800 including VAT. Her flat rate payment is 14.5% of £10,800, which is £1,566. She charged £1,800 of VAT, so she keeps £234.

If Priya were a limited cost business, her rate would be 16.5% and she would pay £1,782, keeping only £18. In her first year on 13.5%, she would have paid £1,458. You can check figures like these quickly with our VAT calculator.

How to make a Flat Rate Scheme invoice with InvoiceDesk

  1. Open the UK invoice generator. The document title defaults to "VAT Invoice".
  2. Enter your details, including your VAT registration number in the "VAT reg. no." field, and your company number if you are a limited company.
  3. Add your client's details. If they are VAT registered, you can add their number in "Client VAT no.".
  4. Under "VAT rate preset", choose "Standard rate 20%" for most services, or the reduced or mixed preset if that is what you supply. Do not enter your flat rate.
  5. Add each line with a clear description, quantity and unit price. Keep invoice numbers in one unbroken sequence; our guide to invoice numbering best practices shows simple formats.
  6. Add your payment terms and bank details, then download the PDF.

The generator runs in your browser with no sign-up, and nothing is uploaded.

Frequently asked questions

Do I show my flat rate percentage on my invoices?

No. HMRC's Notice 733 says to record VAT on sales invoices at the normal rate for the supply, not your flat rate percentage. The flat rate is only used to work out what you pay HMRC.

Can my client reclaim the full 20% VAT if I'm on the Flat Rate Scheme?

Notice 733 says your VAT-registered customers will treat your invoices as normal VAT invoices. The scheme changes what you pay HMRC, not the VAT your customer is charged.

Do I still need a VAT number on my invoices?

Yes. Your VAT registration number is one of the details a full VAT invoice must show, whichever VAT accounting scheme you use.

Can I reclaim VAT on my expenses on the Flat Rate Scheme?

Generally no. GOV.UK says you cannot reclaim VAT on purchases, except for certain capital assets over £2,000.

What happens if I'm a limited cost business?

You use a flat rate of 16.5% whatever your trade sector. GOV.UK says that applies if your goods cost less than 2% of your turnover, or less than £1,000 a year if your costs are more than 2%.

Is the Flat Rate Scheme worth it?

It depends on your sector rate, your costs and your customers. GOV.UK suggests talking to an accountant or tax adviser about whether it is right for you, and that is good advice before you apply.

Summary

On the VAT Flat Rate Scheme your invoices do not change: they are ordinary full VAT invoices showing your VAT number and VAT at the normal rate, usually 20%. The flat rate is only used afterwards, when you multiply your VAT-inclusive turnover by your sector rate to work out what to pay HMRC. Check the limited cost business test each period, remember the 1% first-year discount, and keep your invoices numbered and complete.

This article is general information, not tax advice. Rules and rates change, so check the GOV.UK and HMRC pages linked above or speak to an accountant about your situation.

← All blog posts · Invoicing guides · Make an invoice